 | |
| These new units beat every other comparable dry-well in the industry in performance, size, weight, convenience, ease of calibration, software and price. In addition, the heating and cooling rate of each of these dry-wells is adjustable from the front panel, thermal switches can be checked by these units for actuation testing and multiple-hole inserts are available for a variety of probe sizes.
Choose one of three removeable inserts sized from 1/16" to 1/2" diameter. Insert A handles a full range of probe sizes with a single well of each size. Insert B features two wells each of 3/8", 1/4" and 3/16" in diameter for doing comparison calibrations, and insert C has six 1/4" diameter wells for multiple probe calibrations |
| |
|
Features |
- Accuracy to ±0.5°C
- RS-232 and Windows® software included
- Easy to recalibrate
- Less than eight pounds
|
| | | SPECIFICATIONS — Series ZB
|
Range |
-25 to 140°C (-13 to 284°F), in ambient of 23°C |
| ±3°C (Can do lower depending on ambient.) |
| Accuracy |
±0.25°C |
| Stability |
±0.02°C @ -25°C, ±0.04°C @ 140°C |
| Uniformity |
±0.3°C typical (±0.1 with similar size wells) |
| Resolution |
0.1° |
| Display Scale |
°F or °C, switchable |
| Heating Time |
18 minutes, ambient to 140°C |
| Cooling Time |
20 minutes, ambient to -25°C |
| Stabilization Time |
7 minutes |
| Inserts (included) |
Insert A: 1/2", 3/8", 1/4", 3/16", 1/8" and 1/16" holes |
| Depth |
4.875 inches (124 mm) immersion |
| Computer Interface |
RS-232 included |
| Size |
10.25" H x 5.63" W x 9.63" D (26.1 x 14.3 x 24.5 cm) |
| Weight |
12.5 lb. (5.7 kg) |
| Certification |
7-point NIST-traceable certificate of calibration included |
SPECIFICATIONS
|
Model |
Series ZA (shown right) |
Series ZC (shown left) |
| Range |
95°F to 662°F (35°C to 350°C) |
122°F to 1202°F (50°C to 650°C) |
| Accuracy |
±0.9°F (±0.5°C); accuracy in insert holes greater than 1/4" will be at ±1.8°F (±1°C) |
122°F to 752°F (50°C to 400°C): |
| ±0.9°F (±0.5°C), 752°F to 1202°F (400°C to 650°C): |
| ±1.8°F (±1°C), holes greater than 1/4" (6.35 mm): ±3.6°F (±2°C) |
| Stability |
±0.03°C @ 50°C; |
±0.05°C @ 100°C; ±0.10°C @ 500°C; |
| ±0.05°C @ 350°C |
±0.12°C @ 650°C |
| Uniformity |
±0.72°F (±0.4°C) typical ±0.18°F (±0.1°C) with similarly sized wells |
122°F to 752°F (50°C to 400°C): ±0.72°F (±0.4°C) typical, ±0.9°F (±0.5°C) with similarly sized wells above 752°F (400°C) |
| Heating Times |
12 minutes from ambient to 662°F (350°C) |
12 minutes from ambient to 1202°F (650°C) |
| Cooling Times |
15 minutes from 662°F to 212°F (350°C to 100°C) |
25 minutes from 1202°F to 212°F (650°C to 100°C) |
| Stabilization Time |
7 minutes |
| Immersion Depth |
4.875 inches (124 mm) |
| Computer Interface |
RS-232 included with free Windows®-based software (Model 9930) |
| Power |
115 VAC (±10%), 50/60 Hz and 230 VAC (±10%), 50/60 Hz switchable |
| Size |
6" W x 3.375" H X 7.75" D (152 x 86 x 197 mm) |
4.5" W x 9" H x 7" D (114 x 229 x 178 mm) |
| Weight |
6 lb. (2.7 kg) |
8 lb. (3.6 kg) |
| Certification |
Includes 7-point, NIST-traceable certificate of calibration with data at the following points: 50°C, 100°C, 150°C, 200°C, 250°C, 300°C and 350°C |
Includes 7-point, NIST-traceable certificate of calibration with data at the following points:100°C, 200°C, 300°C, 400°C, 500°C and 600°C |
| CAT NO. |
 |
MODEL |
|
DEscRIPTION |
|
AVAIL |
|
PRICE |
| HR9140A |
|
9140-A |
|
9140 FIELD DRY WELL CALIBRATOR |
|
Yes |
|
4,525,740 |
| HR9140B |
|
9140-B |
|
DRY-WELL (B INSERT INCLUDED) |
|
Yes |
|
4,525,740 |
| HR9140C |
|
9140-C |
|
DRY-WELL (C INSERT INCLUDED) |
|
Yes |
|
4,525,740 |
| HR9141A |
|
9141-A |
|
9141 FIELD DRY WELL CALIBRATOR |
|
Yes |
|
6,481,080 |
| HR9141B |
|
9141-B |
|
DRY WELL (B INSERT INCLUDED) |
|
Yes |
|
6,481,080 |
| HR9141C |
|
9141-C |
|
DRY WELL (C INSERT INCLUDED) |
|
Yes |
|
6,481,080 |
| HR31401 |
|
3140-1 |
|
OPTIONAL INSERT BLANK FOR DRY WELL FOR Field Temperature Dry-Well Calibrators |
|
Yes |
|
302,940
|
| HR31402 |
|
3140-2 |
|
OPTIONAL INSERT A FOR DRY WELL FOR Field Temperature Dry-Well Calibrators |
|
Yes |
|
348,840
|
| HR31403 |
|
3140-3 |
|
OPTIONAL INSERT B FOR DRY WELL FOR Field Temperature Dry-Well Calibrators |
|
Yes |
|
348,840
|
| HR31404 |
|
3140-4 |
|
OPTIONAL INSERT C FOR DRY WELL FOR Field Temperature Dry-Well Calibrators |
|
Yes |
|
348,840
|
| HR9308 |
|
9308 |
|
OPTIONAL RUGGED CARRYING CASE FOR Field Temperature Dry-Well Calibrators |
|
Yes |
|
128,520
|
| HR31411 |
|
3141-1 |
|
OPTIONAL INSERT-BLANK FOR DRY WELL FOR Field Temperature Dry-Well Calibrators |
|
Yes |
|
459,000
|
| HR31412 |
|
3141-2 |
|
OPTIONAL INSERT A FOR DRY WELL FOR Field Temperature Dry-Well Calibrators |
|
Yes |
|
660,960
|
| HR31413 |
|
3141-3 |
|
OPTIONAL INSERT B FOR DRY WELL FOR Field Temperature Dry-Well Calibrators |
|
Yes |
|
660,960
|
| HR31414 |
|
3141-4 |
|
OPTIONAL INSERT C FOR DRY WELL FOR Field Temperature Dry-Well Calibrators |
|
Yes |
|
660,960 |
| HR9309 |
|
9309 |
|
OPTIONAL RUGGED CARRYING CASE FOR Field Temperature Dry-Well Calibrators |
|
Yes |
|
688,500
| | |
|
|
 | |
 |
|
 |
|
이 상품에 대한 사용후기가 아직 없습니다.
사용후기를 작성해 주시면 다른 분들께 많은 도움이 됩니다. |
|
 |
|
 |
|
|
 | |
|
|
|
|
이 상품에 대한 질문이 아직 없습니다.
궁금하신 사항은 이곳에 질문하여 주십시오. |
|
|
|
|
|
|
|
현재위치 : 
